My Intel NUC server just died (whenever it’s plugged in, it makes a buzzing noise, and the external power LED is off (the internal one is on tho)), so I need a new server box. Any recommendations?
I can salvage the RAM (16 GB DDR4) and hard drive (1TB HDD) off of this one, I believe.
As others just said, take the challenge of repairing or correctly identify what’s broken. It should be fun, and part of the diy ethos.
If, you are still going for a new piece for the upgrades…
Depends very much on your scope. Heck, there’s even aesthetics. Do you prefer AMD or Intel? Don’t you feel like having an ARM and take the challenge of compatible images? Would you need to check the transcoding compatibility for Jellyfin? Are you going fangless? Is one 2.5gpbs eth port enough? Etc.
That said, check the reviews from https://www.servethehome.com/ they have articles with benchmarks and videos for all the latest nucs and other hardware’s form factor servers.
Be aware that Intel discontinued the NUCs iirc… but Asus or some vendor might have picked up to grab that market segment.
Good luck!
Are you going fangless?
I would definitely go fangless. I have been bitten enough times. A bite might also transfer viruses. Nowadays I defang all my computers.
Dude, what the fuck. Defanging is so god damn inhumane. If you want a computer without fangs, you don’t want a computer. You want an SBC.
Actually, only after posting it came to my mind that anyway all intel nukes are fangless. That’s their appeal. So that their bytes leave no marks. Long live the vempire.
Thank you! I’m not gonna try and fix the box itself, but somebody suggested it might be the power supply.
Well, I fully disassembled it, and I’ve found some components that are heating up a lot and probably making the buzzing noise.
https://files.catbox.moe/6pazjn.jpg
However I have no idea what they are, if they’re the problem or some connected component. The label doesn’t return anything, so I think this 'uns a goner :(
ask a repair shop. Since the label is the same on the other things around it, they could use a parts tester to determine what it is and then order that part. If you’re in luck, that’s the whole problem. If it’s some other component that failed they could still probably determine and fix it
To be honest, I don’t think it’s worth the bother. This is just an i3-5 something, and I got all the working parts off of it. But it’s good a good idea, thanks!
Did you try another power supply?
I… don’t know why I didn’t think of that. I’ll have to check if I have another.
Might as well repaste it as well
This is the most likely failed part, yes. If you feel adventurous, you can try repairing it like DiodeGoneWild. Looks like the auxiliary power supply (5V 1A independent of others; powers BIOS chips in standby to allow soft power-on) works but the main one does not. Unplug the connectors, connect the black (GND) and green (ENABLE) wires to signal a POWER ON state and check all the voltage rails. Many units use a powerful 12V supply and step-down converters to create the 5V and 3.3V rails, as well as an inverter for the -12V one – if that’s the case, you can try backfeeding 12 V from another PSU and see if the rest come on. Once you identify the failed power supply, check its primary transistor(s) (big 3-pin components on a heatsink) for a short or open circuit.
Here is an alternative Piped link(s):
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.
This was the problem with my Synology recently. System would light up and “click” off over and over again. Replaced the PSU was all it needed.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters NAS Network-Attached Storage NUC Next Unit of Computing brand of Intel small computers PSU Power Supply Unit SBC Single-Board Computer
4 acronyms in this thread; the most compressed thread commented on today has 13 acronyms.
[Thread #158 for this sub, first seen 23rd Sep 2023, 12:45] [FAQ] [Full list] [Contact] [Source code]
If you don’t mind it being completely Chinese based, Beelink with their new Intel 12th gen mini PC were my upgrade from the last Shuttle device I’ve used.
Dual Intel 2.5G NIC plenty of USB and an extremely efficient Intel Alder Lake-N100 with a great price to performance closed the deal for me.
EQ12-N100 is what i went for, to be exact, there are more powerful options too, if needed.
Do you notice any slight problem on EQ12-N100? I was worried about single channel RAM performance.
Not at all, i use it as a firewall, so i wouldn’t notice anything. I can’t imagine it being a problem, it’s still DDR5
+1 for repair. Its most likely PSU and if you are happy with nuc performance its a shame to throw it away.
I don’t know how well your box performed, but I recently snagged a fujitsu esprimo box with an i5-6500. It has 5 sata connectors and two m.2 slots. There’s space for two hard drives and there’s like 5 low profile PCIE slots (2x x16 and 2x x4 I believe)
I think they’re a great deal (if you get the right CPU). Apart from the weird OEM PSU and motherboard, it’s a pretty bonkers box, and I got mine for 40$, which was very lucky
We’ll what do you want to do on your server? Why not just get the same one again?
I got this one for free because a company couldn’t be bothered to reinstall windows
deleted by creator
Do NUCs not have LPDDR RAM, that is laptop RAM?
Yes, it’s laptop RAM
A used Lenovo think centre could be a good replacement IMO (they take SODimm, aka laptop ram, just check DDR3 or DDR4) and usually accepts two sticks + a nvmy & a 2.5 HD and usually with lots of usb & ports for screen(s). They come in all types of prices but usually seems to be sturdy and long lived.
You can get a second-hand, that is, used laptop and use that as a server. The hard drive can be connected using an adapter through USB.
