🐍🩶🐢

I had to change mine to mac address naming on my proxmox server after the second time the name changed due to a GPU or SSD being added. It was kind of like, so what, if an SSD dies suddenly or I have some issue with a device you are going to rename my fucking nic card again while I am trying to troubleshoot? Absolutely deranged.

Sorry, didn’t make it home until today and not sure if you get notifications on edits. You will need a monitor and keyboard hooked up to your server as you will not have ssh access until the network config is “fixed”. I would do the below with the GPU removed, so you know 100% that your networking config is correct before mucking about further.

Step 1 - Create 99-default.link file

Add a /etc/systemd/network/99-default.link with the below contents.

# SPDX-License-Identifier: MIT-0
 #
 # This config file is installed as part of systemd.
 # It may be freely copied and edited (following the MIT No Attribution license).
 #
 # To make local modifications, one of the following methods may be used:
 # 1. add a drop-in file that extends this file by creating the
 #    /etc/systemd/network/99-default.link.d/ directory and creating a
 #    new .conf file there.
 # 2. copy this file into /etc/systemd/network or one of the other paths checked
 #    by systemd-udevd and edit it there.
 # This file should not be edited in place, because it'll be overwritten on upgrades.

 [Match]
 OriginalName=*

 [Link]
 NamePolicy=mac
 MACAddressPolicy=persistent

Step 2 - Reboot and find new name of NIC that will be based on MAC

I forget if you have to reboot, but I am going to assume so. At this point, you can get the new name of your nic card and fix your network config.

1. ip link should list all of your nic devices, both real and virtual. Here is how mine looks like for reference, with the MAC obfuscated:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enxAABBCCDDEEFF: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master vmbr0 state UP mode DEFAULT group default qlen 1000
    link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff
3: vmbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
    link/ether AA:BB:CC:DD:EE:FF brd ff:ff:ff:ff:ff:ff

Step 3 - Fix your network config and restart network manager

You will need to edit your /etc/network/interfaces file so the correct card is used.

1. Make a copy of /etc/network/interfaces, just in case you mess something up.
2. sudo vim /etc/network/interfaces (or whatever text editor makes you happy) It will need to look something like below. I have to have DHCP turned on for mine, so your config likely uses static. Really all you need to do is change wherever it says enp yada yada to the enxAABBCCDDEEFF you identified above.

 source /etc/network/interfaces.d/*

 auto lo
 iface lo inet loopback

 iface enxAABBCCDDEEFF inet manual

 auto vmbr0
 iface vmbr0 inet dhcp
 #iface vmbr0 inet static
 #address 192.168.5.100/20
 #gateway 192.168.0.1
     bridge-ports enxAABBCCDDEEFF
     bridge-stp off
     bridge-fd 0

3. Restart your networking service. You shouldn’t need to reboot. sudo systemctl restart networking.service

Step 4 - Profit?

Hopefully at this point you have nework access again. Check the below, do some ping tests, and if it doesn’t work, double check that you edited the interfaces file correctly.

1. sudo systemctl status networking.service will show you if anything went wrong and hopefully show that everything is working correctly
2. ip -br addr show should show that the interface is up now.

lo               UNKNOWN        127.0.0.1/8 ::1/128
enxAABBCCDDEEFF  UP
vmbr0            UP             192.168.5.100/20 

At this point, if all is well, I would reboot anyways, just to make sure. If you add any GPUs, sata drives, other PCI device, disable/enable wifi/bt in the BIOS, or anything else that changes the PCI numbering, you don’t have to worry about your NIC changing.

I am not at home, but what I did was change the 99-default.link file. I found this from the two pages below. https://wiki.debian.org/NetworkInterfaceNames#CUSTOM_SCHEMES_USING_.LINK_FILES https://wiki.debian.org/NetworkInterfaceNames

Basically, by doing this, your nic cards will be forcibly named using the mac address:

#/etc/systemd/network/99-default.link
 [Match]
 OriginalName=*

 [Link]
 NamePolicy=mac
 MACAddressPolicy=persistent

Afterwards, you will need to reboot and then update your network config file to use the correct names. I don’t ever change the network config with the GUI in proxmox as it has wrecked it too many times. I will update this reply again later with some more information on what to do.

Hey, you ok? I am not ok today, but I definitely don’t want to fill my skull with bullets. Go wash your sheets/bedding. For whatever reason, clean sheets are the best.

I changed my settings to name nic cards by mac address instead of the enumeration as I got sick of the name changing when I would add/remove pci devices.

In a similar train of thought, have you tried having (good) orange juice with Mexican food? I used to love having it once in a while when we brought home Rosa’s. Never did at a restaurant. Not a complete heathen. 😁

I use this on all on my Pis. It just works. I like the text config file for headless installation and how you can even add scripts to run on install too.

I never considered old DOS games until now. Thank you!

I think I vaguely remember something about that, but I would be pretty upset if the keyboard navigation was unusable. It is almost as bad as the stupid mouse enabled BIOSs that never work. It doesn’t even work on the Dell laptop I have for work. The keyboard navigation is always extra special in those cases and involves a lot of button mashing to get to the correct thing, if I can figure it out at all.

I don’t use wired mice either and had to dig the old gaming mouse out recently so I could get to some menus on a new machine to pair the mouse. I have done the mouse pairing thing through console and it isn’t the best experience, especially if you are trying to figure out if things are working in the first place. For me, I could figure it out. For a new user, you are asking a lot.

Just give me an old school OS installer with simple menus, easy keyboard navigation, and the bare minimum guidance needed to not entirely fuck it up.

The best was on arch because I had no idea how to use pacman, which I needed to install man, when I needed how to use pacman. I will have to take a look at tldr. I mostly use Debian without a desktop environment, but have an Arch VM for gaming here and there. Works out.

I get confused every time I install a distro and man isn’t installed by default. I guess I get the bare minimum philosophy, but it throws me off every time. First thing I install is vim, man, git, and probably a couple other things I can’t remember right now.

I do like a decent man page that has examples for us dummies and I have found that they have improved a lot over the years.

Ok. I tried Firefox for about a month on my Android phone and Mac, but unfortunately had to go back to Chrome on both. I don’t really know what to do at this point. I run enough firewalls and ad blockers that using Chrome has never particularly bothered me from a usability standpoint, but I get the point everyone is trying to make. However, I also don’t want to spend weeks of my life fighting to get yet another open source program to work the same as the “other” program, or find some substitute that I can live with.

I used to use Firefox when I was a kid and loved all of the extensions. However, it seems severely lacking now. I tried to find something to give me group tabs, and found old abandoned projects or some tree thing that made 0 sense to me. I saw an article I think explaining that it is coming? I don’t understand why a feature like this is missing when it used to exist a long time ago. Seems like basic functionality to me. Also, why is the tab bar so big? It takes up a lot of screen real estate.

The thing that killed it for me was the lack of PWA support, which is how I have used Outlook for around 6+ years. I fought with the extension for a while and things sort of worked on and off for a few days here or there, but half the time it would open emails in the main browser anyway. Once it got to the point where Outlook was completely blank and refused to load at all, I gave up. I could never get it to work again. I hoped I could maybe setup the PWA to just be in Chrome or Safari, but it just opens it as a tab in Firefox anyway. I tried, but I am not going to spend hours fighting with it anymore at this point and it would be nice if it was built into the browser instead of a random extension.

It was a better experience on the phone, and I like the bar on the bottom, until I realized it was draining my battery. I found a thread of users complaining about it for the last few months with no fix. I don’t even use the sync feature, but that supposedly is the culprit? Phone kept dying and I barely used it. Looked at the battery usage screen and there it was, almost the top item. I would love to use Firefox on Android, but not at the expense of my battery. Sorry.

I will happily defend you on this point. Down vote away people. As long as you don’t shove past the rows in front of you or bonk me with luggage, we good. I try to remember the passengers who had to store luggage father back and see if I can get it passed forward. I will totally boss people to sit back down if someone needs to get to the front ASAP due to close connections. If it is going to be a while, I will try to grab my backpack and sit back down.

Now, people with oversized rollerboards? Yeah. I get pretty irritated over that and the vast number of issues that causes with boarding and deplaning. The airlines make it worse with price hikes. I personally check all of my luggage and rarely run into issues. If I have any major concerns I will throw a couple things into a bag that will fit under my seat or FedEx it if we are really going there.

I am so jealous. Those assholes will not run it to my apartment. Landlord tried. The entire neighborhood behind and next to us has it. I am just done and fed up with Spectrum. Maybe I should call and bitch.

Day 1 was some awesome crazy dude on IRC teaching me how to compile the kernel from source, what options to choose, and then installing Slackware.

Thank you! I will give that a shot tomorrow and test it

I will take a look at it, but the fundamental issue is it screws with the iommu groups too and then I have to go fix that in proxmox. If I can at least guarantee a network connection then I can remote in and fix it in the event something goes really wrong.

It is only the nvme drives that do it. That damn PCI busses and iommu groups get renumbered every damn time I remove or add one. The SATA is safe though.

I have a hatred for the enp id thing as it isn’t any better for me. It changes on me every time I add/remove a hard drive or enable/disable the WiFi card in the BIOS. For someone who is building up a server and making changes to it, this becomes a real pain. What happens if a drive dies? Do I have to change the network config yet again over this?

I think most other comments cover the important bits, so I will try not to repeat them. I have been using a M1 MacBook Air since they came out and I love it. The battery life is great, the desktop environment is very clean and unobtrusive, and I don’t have to fight with it very often. I use brew to install my FOSS stuff. I certainly don’t pay for anything extra. Only major complaint is the way they do the windowing. Don’t know the right word for it. Maximize, minimize, “alt-tab”, and snapping to half/quarter/etc like Windows isn’t great in comparison and pretty lacking. Thankfully there are 3rd party applications such as Rectangle and AltTab that make it better. I haven’t used Stage Manager as it doesn’t fit my workflow.

The only other OSs I use at home are Debian and Arch. Those cover any additional gaming I might want to do, but they are primarily servers. I use GeForce Now for everything else.

I tried a W11 on a VM and I cannot describe the amount of hatred I have for it. I feel like I am fighting with the OS at every turn. I don’t really have a problem with W10 from a generic user experience, other than that advertising BS they keep trying to sneak in.